High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use. Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance. Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation.

Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot. This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holdersM2 - M12 1/16" - 1/2"& M6 - M20 (1/4" - 3/4"), 2 die holders 200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included. 110-Piece Tap and Die Set. Our durable and reliable 110-piece tap and die set includes Metric coarse and fine sizes, super-hard & high-precision, and can offer you excellent performance in applications like machine tools, precision modules, transformers, etc.

Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools.

Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.

Tungsten steel taps with high-hardness can stand high temperatures and corrosion durable enough for your long-lasting use. Fully ground tap is super-sharp enough to guarantee its smooth chip-removing & tapping without fracturing. A lock hole on dies is to ensure its double stability when screwing it on. An adjustable top wrench is for you to adjust tap size freely.

The broad range of sizes and thread pitch, a total of 110 pieces to meet your different requirements. It is extensively used in many fields like machine tools, precision modules, transformers, etc. Sub-Type: ENGINEERING TAP AND DIE SET.

Tap Holder: M2 - M12 (1/16" - 1/2"). Tap Holder: M6 - M20 (1/4" - 3/4"). Die Holder: Total length 200 mm (1 diameter bore). Die Holder: Total length 270 mm (1 1/2 diameter bore).

Taper Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). Plug Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). Dies: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). 2 x Tap holders (different size).1 x T- bar tap wrench. 2 x Die holder (different size). 1 x Portable Storage Case. ENGINEERING TAP AND DIE SET.

M2 - M12 (1/16" - 1/2"). M6 - M20 (1/4" - 3/4"). Total length 200 mm (1 diameter bore).Total length 270 mm (1 1/2 diameter bore). 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). 35pcs M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75. This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies".

The seller is "zinkey" and is located in this country: US. This item can be shipped to United States.

- Custom Bundle: No
- Item Height: 2.7 in
- Item Width: 18 in
- Item Length: 13 in
- Manufacturer Warranty: 3 Months
- UPC: 0882510943844
- Brand: VEVOR
- Type: Tap & Die Set
- System of Measurement: Metric
- Number of Pieces: 110
- Color: Gray
- Model: VR-110
- MPN: XCXXZ009
- Material: Tungsten Steel
- Item Weight: 80 lbs