Tap and Die Set 86PCS Tungsten/Carbon Steel Hand Threading Tool Wrench

86 Piece Tap and Die Set. Our durable and reliable 86/110-piece tap and die set includes Metric coarse and fine sizes, super-hard & high-precision, and can offer you excellent performance in applications like machine tools, precision modules, transformers, etc. Tough Equipment & Tools, Pay Less.

VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices.

Tungsten steel taps with high-hardness can stand high temperatures and corrosion durable enough for your long-lasting use. Fully ground tap is super-sharp enough to guarantee its smooth chip-removing & tapping without fracturing. A lock hole on dies is to ensure its double stability when screwing it on. An adjustable top wrench is for you to adjust tap size freely. The broad range of sizes and thread pitch, a total of 86 pieces to meet your different requirements. It is extensively used in many fields like machine tools, precision modules, transformers, etc. Tap And Die set: Titanium.

Net Weight: 5.9928 kg/13.2 lbs. Volumetric Weight: 1.57717 kg/3.473942lbs. Package Length: 50 cm/19.69'.

Package Width: 27 cm/10.63'. Package Height: 7 cm/2.76'. Gross Weight: 6 kg/13.22 lbs. 1 x Adjustable Tap Wrench (M6 to M20 - 1/4" to 3/4").

1 x Long Handle Adjustable Tap Wrench (M3 to M12 - 1/16" to 1/2"). 1 x T-Handle Tap Wrench. 1 x Die Handle (M25 - 1). 1 x Long Die Handle (M38 - 1-1/2).

1 x Screw Pitch Gauge Metric. 1 x Screw Pitch Gauge SAE. Sub-Type: ENGINEERING TAP AND DIE SET. Tap Holder: M2 - M12 (1/16" - 1/2"). Tap Holder: M6 - M20 (1/4" - 3/4").

Die Holder: Total length 200 mm (1 diameter bore). Die Holder: Total length 270 mm (1 1/2 diameter bore). Taper Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). Plug Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5).

Dies: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). 2 x Tap holders (different size).

1 x T- bar tap wrench. 2 x Die holder (different size). 1 x Portable Storage Case. High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use.

Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance. Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation. Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot. This tap and die set comes with 86 pieces in total: 39 pcs taps, 39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included.

SAE TAP SIZES:1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18. SAE DIE SIZES:1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18. METRIC TAP SIZES M3-0.5, M 4-0.7, M 5-0.8, M 6-1.0, M 7-1.0, M 8-1.0, M 8-1.25, M 9-1.25, M 10-1.5, M 10-1.25, M 11-1.5, M 11-1.25, M 12-1.75, M 12-1.5, M 14-2, M 14-1.5, M 16-2, M16-1.5. METRIC DIE SIZES M 3-0.5, M 4-0.7, M 5-0.8, M 6-1.0, M 7-1.0, M 8-1.0, M 8-1.25, M 9-1.25, M 10-1.5, M 10-1.25, M 11-1.5, M 11-1.25, M 12-1.75, M 12-1.5, M 14-2, M 14-1.5, M 16-2, M16-1.5. Your feedback is very important to us, we sincerely invite you to leave us.

If you're satisfied with our products and service. That's the biggest motivation for us to become stronger and provide better new items. Thank you for your support. We would give you the best solution. This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies".

The seller is "blue--bird" and is located in this country: CA. This item can be shipped to Canada, United States.

Origin: Mainland China
Tap Holder 1(110PCS): M6 - M20 (1/4 inch - 3/4 inch)
System of Measurement: Metric
DIY Supplies: ELECTRICAL
Material: Tungstem Steel
Die Holder 1(110PCS): Total length 200mm (1inch diameter bore)
Plug taps(110PCS): 35pcs
Sub-Type: Engineering Tap And Die Set
Dies(110PCS): 35pcs
Die Holder 2(110PCS): Total length 270mm (1-1/2 inch diameter bore)
Tap Wrench: T Bar
Tap And Die set: Titanium
Taper taps(110PCS): 35pcs
Number of Pieces: 86pc/110pc
UPC: 726084991460