Tap and Die Set 110PCS Metric M2-M18 Hand Threading Cutting Wrench Tools DHLSHIP

Tap and Die Set 110PCS Metric M2-M18 Hand Threading Cutting Wrench Tools DHLSHIP
Tap and Die Set 110PCS Metric M2-M18 Hand Threading Cutting Wrench Tools DHLSHIP
Tap and Die Set 110PCS Metric M2-M18 Hand Threading Cutting Wrench Tools DHLSHIP

Tap and Die Set 110PCS Metric M2-M18 Hand Threading Cutting Wrench Tools DHLSHIP
110-Piece Tap and Die Set. Our durable and reliable 110-piece tap and die set includes Metric coarse and fine sizes, super-hard & high-precision, and can offer you excellent performance in applications like machine tools, precision modules, transformers, etc. Sub-Type: ENGINEERING TAP AND DIE SET. Tap Holder: M2 - M12 (1/16" - 1/2"). Tap Holder: M6 - M20 (1/4" - 3/4"). Die Holder: Total length 200 mm (1 diameter bore). Die Holder: Total length 270 mm (1 1/2 diameter bore). Taper Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5).

Plug Taps: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5). Dies: 35pcs (M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5).

High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use. Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance.

Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation. Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot. This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holdersM2 - M12 1/16" - 1/2"& M6 - M20 (1/4" - 3/4"), 2 die holders 200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included. This product is only suitable for repairing, not applicable for heat treated products and coating products.

This item is in the category "Home & Garden\Tools & Workshop Equipment\Hand Tools\Taps & Dies". The seller is "autoobdshop" and is located in this country: CN.

This item can be shipped worldwide.


Tap and Die Set 110PCS Metric M2-M18 Hand Threading Cutting Wrench Tools DHLSHIP